Jump to content
News Ticker
  • Christmas 2018 countdown has already begun. Will you be ready???
  • Why do we love Christmas? It's all about the traditions. In this chaotic world we can miss the "good old days." Christmas reminds us of that time.
  • The first recorded date of Christmas being celebrated on December 25th was in 336, during the time of the Roman Emperor Constantine. A few years later, Pope Julius I officially declared that the birth of Jesus would be celebrated on that day.
  • Santa Claus's sleigh is led by eight reindeer: Dasher, Dancer, Prancer, Vixen, Comet, Cupid, Dunder (variously spelled Donder and Donner), and Blixem (variously spelled Blixen and Blitzen), with Rudolph being a 20th-century inclusion.
  • Outdoor Christmas lights on homes evolved from decorating the traditional Christmas tree and house with candles during the Christmas season. Lighting the tree with small candles dates back to the 17th century and originated in Germany before spreading to Eastern Europe.
  • That big, jolly man in the red suit with a white beard didn’t always look that way. Prior to 1931, Santa was depicted as everything from a tall gaunt man to a spooky-looking elf. He has donned a bishop's robe and a Norse huntsman's animal skin. When Civil War cartoonist Thomas Nast drew Santa Claus for Harper's Weekly in 1862, Santa was a small elflike figure who supported the Union. Nast continued to draw Santa for 30 years, changing the color of his coat from tan to the red he’s known for today.
Sign in to follow this  
tigger2U43

Replacement Blower Motor

Recommended Posts

I have an 3.5 foot inflatable M&M that I purchaced two seasons ago. This year when I went to plug it in the motor is not working. There is power to the inflatable because the lights light up. Does anyone know where I can find a replacement blower?

Share this post


Link to post
Share on other sites

You will be better off to buy a cheap 4' and replace it yourself. Is the motor on the stand or on the inflatable?

Share this post


Link to post
Share on other sites

Krusaders, the motor is screwed onto a plastic base which is attached to the inflatable. I have thought about going the route of buying a cheap inflatable and swapping the motor. I may do that after christmas if I have not found an alternative. I just thought there might be a web site where I could go to get a replacement.

Share this post


Link to post
Share on other sites

Krusaders, the motor is screwed onto a plastic base which is attached to the inflatable. I have thought about going the route of buying a cheap inflatable and swapping the motor. I may do that after christmas if I have not found an alternative. I just thought there might be a web site where I could go to get a replacement.

There is a website for replacement parts but will have to look to see if they have the 4' fans...Gemmys replacement parts all go to www.holidayinflatablestore.com

Gemmy has supply him with all of it now...

Share this post


Link to post
Share on other sites

Just ordered this for my igloo with santa sitting on it, I'll let you know how it turns out.

Just got the delivery today and http://www.yardinfla...tack_p_659.html is what was in the box! No tethers or stakes but I have already inflated in the living room (wife loved it). I'm going to try and take the motor out so I'll be able to put it back in for next halloween. I have looked for pictures or videos about changing the motor out and couldn't find any, so maybe I'll try and make one.

Edited by Mike Bluford

Share this post


Link to post
Share on other sites

Glad you got something. Hopefully the fan will work on your other Inflatable. If it is the right size should not be to hard to change out then you can put it back on the Pumpkin stack for Halloween.

Share this post


Link to post
Share on other sites

The only problem might be thats its a newer model than the other one (2004 or 5) and I think they mount different, but I'll figure it out thats part of the fun :P

Share this post


Link to post
Share on other sites

Hi everyone!! First of all let me start by saying Merry Christmas!!! ......... Now for what I came here for..... My son has a 6 ft.+ grinch inflatable that isn't working anymore and was wondering if anyone on here might know what is wrong with it... Last year the light would not work and this year he couldn't get anything to work.. motor? fuse? bad cord?.............. I have no clue about this stuff but told him I would ask you guys!! I figured someone on here would be able to tell us something.

Thank you!!

Share this post


Link to post
Share on other sites

I think I have the same Grinch, the lights inside of mine are just clear c7 bulbs. There are several of them inside of there. You just unzip from the bottom, and pull the lights out and pop that little plastic cover open and you can check to see if the light bulbs are burned out. I bought my Grinch broken off of ebay, there were not new ones for sale that I found anywhere this year and I had to replace the motor and I didn't keep the old one so I can't tell you about the fuse. I had a motor from another inflatable in storage and just used that. If you don't want to mess with fixing it, I would keep it and list it on ebay next December even broken it will probably bring a decent price. It seems that when people want a Grinch, they really want a Grinch.

You can just watch garage sales this summer and I'll bet you can find used inflatables with similar motors, lights etc if you want to fix it. It really isn't hard to replace the motor. I did need a star shaped screwdriver to get the old one off, and of course a phillips screwdriver.

Share this post


Link to post
Share on other sites

I think I have the same Grinch, the lights inside of mine are just clear c7 bulbs. There are several of them inside of there. You just unzip from the bottom, and pull the lights out and pop that little plastic cover open and you can check to see if the light bulbs are burned out. I bought my Grinch broken off of ebay, there were not new ones for sale that I found anywhere this year and I had to replace the motor and I didn't keep the old one so I can't tell you about the fuse. I had a motor from another inflatable in storage and just used that. If you don't want to mess with fixing it, I would keep it and list it on ebay next December even broken it will probably bring a decent price. It seems that when people want a Grinch, they really want a Grinch.

You can just watch garage sales this summer and I'll bet you can find used inflatables with similar motors, lights etc if you want to fix it. It really isn't hard to replace the motor. I did need a star shaped screwdriver to get the old one off, and of course a phillips screwdriver.

Thanks for your help! I will be on the lookout for something that might work. my son really likes his Grinch so we have to try and fix it before we consider selling it... LoL! Thanks again!

Share this post


Link to post
Share on other sites

I have this huge Santa Claus that I bought last year. It's my favorite and when I tried to put it up, the fan motor died. It's square and about 4 inches squared. It says it's 12 volt brushless fan. I tried to look up the company but it's in China and you can only buy in batches. I have no idea where to get one like this or if I can use a different one. It also has to wires that light up the lights inside. My grandson and the rest of the family are as upset as I am.

Share this post


Link to post
Share on other sites

what I did with mine was I bought an indistrial air blower fron harbour freight and put it on one of my puffies and it stands up really well. Its about 3 years old and a bit toasty and it would not stand up straight. after I put that industrial blower on it guess what upright like a board

Share this post


Link to post
Share on other sites

I'm not sure how we would seal it up around the hole. We saved a whole year to get this but I need to find something not to expensive. I guess I could always sew it around the whole. I'm willing to try anything. This blowup means a lot to us,

Share this post


Link to post
Share on other sites

A lot of times when I go to start up an airblown after storage it won't work. I will take the cover off of the fan, put a little oil on the shaft and spin it by hand a few times.  It will run fine after that. 

Share this post


Link to post
Share on other sites

I buy inflatables that I do not want at the 75% off sales after christmas and salvage the motors.  I have found that as long as you are creative you can usually find a way to attach a fan that works.  Also as they get older many of the inflatables start to wear thin and adding a second motor can get you a few more years!

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×