Jump to content
News Ticker
  • Christmas 2018 countdown has already begun. Will you be ready???
  • Why do we love Christmas? It's all about the traditions. In this chaotic world we can miss the "good old days." Christmas reminds us of that time.
  • The first recorded date of Christmas being celebrated on December 25th was in 336, during the time of the Roman Emperor Constantine. A few years later, Pope Julius I officially declared that the birth of Jesus would be celebrated on that day.
  • Santa Claus's sleigh is led by eight reindeer: Dasher, Dancer, Prancer, Vixen, Comet, Cupid, Dunder (variously spelled Donder and Donner), and Blixem (variously spelled Blixen and Blitzen), with Rudolph being a 20th-century inclusion.
  • Outdoor Christmas lights on homes evolved from decorating the traditional Christmas tree and house with candles during the Christmas season. Lighting the tree with small candles dates back to the 17th century and originated in Germany before spreading to Eastern Europe.
  • That big, jolly man in the red suit with a white beard didn’t always look that way. Prior to 1931, Santa was depicted as everything from a tall gaunt man to a spooky-looking elf. He has donned a bishop's robe and a Norse huntsman's animal skin. When Civil War cartoonist Thomas Nast drew Santa Claus for Harper's Weekly in 1862, Santa was a small elflike figure who supported the Union. Nast continued to draw Santa for 30 years, changing the color of his coat from tan to the red he’s known for today.
jimiheadstone

Fast way to add reindeer to the roof

Recommended Posts

Want to share how I have been mounting reindeer on the roof.

bought nine flag poll mounts.. the best thing about these they can be adjusted to the pitch of your roof.

wood dowls 

metal brackets 

table saw 

I cut the dowls to the length I needed. In my case  they were mounted sideways down the slope. The reindeer are side by side with the rear reigndeer forward a bit. I cut the dowls for the reindeer an inch lower than the one in the front  to accommodate the pitch of the roof. 

I used the table saw to grove out the dowls for the bracket and glued and screwed it together. 

I have been using this for Years now. Makes it way easy to mount them on any pitch roof 

F78414C6-6D4F-4AF7-B39C-5EA0C41D5649.jpeg

98338C51-EDE4-44A0-8ED9-B5E93279BFCF.jpeg

859AD956-5FC4-41A8-9546-F59E5F6182B1.jpeg

1BB4260E-8BAB-431F-991E-4F57FA0704BF.jpeg

750A8383-6F21-4F7F-8BE4-8C724F7063AF.jpeg

Share this post


Link to post
Share on other sites

Screws scare me too!   I bolt mine to a 2/4 frame and then cabe it to the roof.

Share this post


Link to post
Share on other sites
9 hours ago, timpwk said:

Screws scare me too!   I bolt mine to a 2/4 frame and then cabe it to the roof.

would you happen to have any photos of that setup?  

Share this post


Link to post
Share on other sites

Looks great but I would be concerned about the integrity of the roof after you remove the screws.

Share this post


Link to post
Share on other sites

Not on the roof but this is how I mounted my sleigh and reindeer. Steel wire from Menards ran between two trees with screw eye to loop it thru. Then hang the figurines with floral wire from the stainless steel wire 

CBB546A4-39CB-40C5-B719-1A2EA8D5E728.jpeg

E7471C46-970B-4473-8AC8-56174746C487.jpeg

29048FFB-F212-440B-B172-F3961C003739.jpeg

Edited by Maroonz28
  • Like 2

Share this post


Link to post
Share on other sites

I have been mounting this for 5 years now - For 5 years I have been using the same exact screw holes and never had a leak

Below the mounts are metal screw receivers  that have been mounted to the roof that get covered after use with a cap that seals around the shingles....

I wish i took pics of the screw receivers... They almost look like the screw in sheetrock wall hangers... 

The screws are not screwed directly into the roof... 

They use these exact mounts for satellite dish mounts that they are SUPPOSED to use 

The same type of mounts used for some solar panels installs 

They never leak

Share this post


Link to post
Share on other sites
13 hours ago, jimiheadstone said:

I have been mounting this for 5 years now - For 5 years I have been using the same exact screw holes and never had a leak

Below the mounts are metal screw receivers  that have been mounted to the roof that get covered after use with a cap that seals around the shingles....

I wish i took pics of the screw receivers... They almost look like the screw in sheetrock wall hangers... 

The screws are not screwed directly into the roof... 

They use these exact mounts for satellite dish mounts that they are SUPPOSED to use 

The same type of mounts used for some solar panels installs 

They never leak

Interesting!  Do you have a link to the mounting "screw"?  Where did you get them?

Share this post


Link to post
Share on other sites

I will get picture of up, but we have had snow on the roof and waiting for it to be safe to go on to take pics..

Share this post


Link to post
Share on other sites

Looks great!

Honestly, I’d spray paint the poles and hardware black to make it all disappear as evening comes.


Sent from my iPhone using Tapatalk

  • Like 1

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×