Jump to content
Did you know?
  • The original Rudolph did not have a red nose. In that day and age, red noses were seen as an indicator of chronic alcoholism and Montgomery Ward didn’t want him to look like a drunkard. To complete the original picture, he was almost named Reginald or Rollo.
  • The Christmas wreath was originally hung as a symbol of Jesus. The holly represents his crown of thorns and the red berries the blood he shed.
  • The three traditional colors of most Christmas decorations are red, green and gold. Red symbolizes the blood of Christ, green symbolized life and rebirth, and gold represents light, royalty and wealth.
  • Tinsel was invented in 1610 in Germany and was once made of real silver.
  • The oldest artificial Christmas trees date back to the late 1800s and were made of green raffia (think grass hula skirts) or dyed goose feathers. Next the Addis Brush Company used their machinery that wove toilet brushes to create pine-like branches for artificial Christmas trees that were less flammable and could hold heavier decorations.
  • ‘Jingle Bells’ – the popular Christmas song was composed by James Pierpont in Massachusetts, America. It was, however, written for thanksgiving and not Christmas.
  • Coca-Cola was the first company that used Santa Claus during the winter season for promotion.
  • Hallmark introduced their first Christmas cards in 1915.
  • The first recorded date of Christmas being celebrated on December 25th was in 336, during the time of the Roman Emperor Constantine. A few years later, Pope Julius I officially declared that the birth of Jesus would be celebrated on that day.
  • Santa Claus's sleigh is led by eight reindeer: Dasher, Dancer, Prancer, Vixen, Comet, Cupid, Dunder (variously spelled Donder and Donner), and Blixem (variously spelled Blixen and Blitzen), with Rudolph being a 20th-century inclusion.
  • Outdoor Christmas lights on homes evolved from decorating the traditional Christmas tree and house with candles during the Christmas season. Lighting the tree with small candles dates back to the 17th century and originated in Germany before spreading to Eastern Europe.
  • That big, jolly man in the red suit with a white beard didn’t always look that way. Prior to 1931, Santa was depicted as everything from a tall gaunt man to a spooky-looking elf. He has donned a bishop's robe and a Norse huntsman's animal skin. When Civil War cartoonist Thomas Nast drew Santa Claus for Harper's Weekly in 1862, Santa was a small elflike figure who supported the Union. Nast continued to draw Santa for 30 years, changing the color of his coat from tan to the red he’s known for today.
  • Christmas 2018 countdown has already begun. Will you be ready???
  • Why do we love Christmas? It's all about the traditions. In this chaotic world we can miss the "good old days." Christmas reminds us of that time.
TysonHphoto

LOR Channels not going off when they are supposed to be

Recommended Posts

I've got a few sequences where it seems like it's just one channel in particular that doesn't seem to turn off, when there is clearly an off command. Tried saving as a new file, doing a new file, etc. It's one channel on one controller. Any ideas?

Share this post


Link to post
Share on other sites

Do you have some very *fast* timing events happening to that channel or even to other channels right before that off should happen (and doesn't)?

I have run into that every now and then. Think in terms of the amount of traffic on your LOR network. If there's a ton of packets going out, one might get missed. It usually shows up as an error that happens in the same spot each time.

The easiest work-around I've found is to just extend the offending fixture a bit past the overloaded part with a fade down.

Let's say you had a .3 sec fade down and channel 5 on controller 21 sticks (sometimes or all the time). For just that one channel, change it to a .4 or .5 fade down. It's a low light level anyway and you may not be able to see it at all visually. The controller though, is much more likely to get that *off* packet at the end.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...