Jump to content

Recommended Posts

Hi ok so now i have 15 rgb strips want to create a chase of all red from 1st strip to last then chase in green from 1st strip to last then blue from 1st to last easy on regular channels but how do you do it using rgb channels using the chase tool in lor? Thanks Dennis Laff

Edited by hotrods
Link to post
Share on other sites

I would suggest the following:

Use the RGB tool to set a solid color on the first channel of the first strip.

Then use the chase tool so you have a solid blue chase.

Then repeat across the grid for the other colors (at the point you want the color to change).

Then use the fill tool to connect them all together and it will automatically smooth out the chase.

Hope this makes sense.

Edited by JHolmes
Link to post
Share on other sites

Or you could open the RGB channels on the first strip, turn on a red timing mark, skip some timing marks and turn on the green , skip some time marks and turn on the blue. Collapse the RGB channels on the first strip. Than choose the chase tool and drag across the three colors now turned on and down across the timing grid. All three colors will now have a uniform chase across the other strips.

Steve

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...