Mike's creation 34 Posted November 21, 2017 Report Share Posted November 21, 2017 Ok, turned the system on today and it is ****! I have done nothing to this computer or the lOR controllers since last year. No updates or anything. Connected one controller thru cable to usb converter plugged into my computer. Fired everything up would not talk to the computer. Computer will not recognized com port 3. Tried 3 different cables. this is on windows 10. internet shut off on this computer to keep crap updates out. Any ideas. Like I said last year shut it down (was running great) put it in storage for a year, pulled it out yesterday and nothing will work. I can see and hear sequences on laptop but will not communicate with controllers. (2 units, one tried alone to communicate with computer) HELP? Mike Link to post Share on other sites
Thebug 36 Posted November 21, 2017 Report Share Posted November 21, 2017 I have the same problem and just switched to comm 4. To do that just go into your hardware utility on the left side and you can manually set it or just do a refresh and it'll switch to comm 4 at least it did for me Link to post Share on other sites
qberg 158 Posted November 21, 2017 Report Share Posted November 21, 2017 open Hardware utility and on the left, click search for the comm port. why they move around sometimes...I have no idea. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.