Jump to content
Did you know?
  • The original Rudolph did not have a red nose. In that day and age, red noses were seen as an indicator of chronic alcoholism and Montgomery Ward didn’t want him to look like a drunkard. To complete the original picture, he was almost named Reginald or Rollo.
  • The Christmas wreath was originally hung as a symbol of Jesus. The holly represents his crown of thorns and the red berries the blood he shed.
  • The three traditional colors of most Christmas decorations are red, green and gold. Red symbolizes the blood of Christ, green symbolized life and rebirth, and gold represents light, royalty and wealth.
  • Tinsel was invented in 1610 in Germany and was once made of real silver.
  • The oldest artificial Christmas trees date back to the late 1800s and were made of green raffia (think grass hula skirts) or dyed goose feathers. Next the Addis Brush Company used their machinery that wove toilet brushes to create pine-like branches for artificial Christmas trees that were less flammable and could hold heavier decorations.
  • ‘Jingle Bells’ – the popular Christmas song was composed by James Pierpont in Massachusetts, America. It was, however, written for thanksgiving and not Christmas.
  • Coca-Cola was the first company that used Santa Claus during the winter season for promotion.
  • Hallmark introduced their first Christmas cards in 1915.
  • The first recorded date of Christmas being celebrated on December 25th was in 336, during the time of the Roman Emperor Constantine. A few years later, Pope Julius I officially declared that the birth of Jesus would be celebrated on that day.
  • Santa Claus's sleigh is led by eight reindeer: Dasher, Dancer, Prancer, Vixen, Comet, Cupid, Dunder (variously spelled Donder and Donner), and Blixem (variously spelled Blixen and Blitzen), with Rudolph being a 20th-century inclusion.
  • Outdoor Christmas lights on homes evolved from decorating the traditional Christmas tree and house with candles during the Christmas season. Lighting the tree with small candles dates back to the 17th century and originated in Germany before spreading to Eastern Europe.
  • That big, jolly man in the red suit with a white beard didn’t always look that way. Prior to 1931, Santa was depicted as everything from a tall gaunt man to a spooky-looking elf. He has donned a bishop's robe and a Norse huntsman's animal skin. When Civil War cartoonist Thomas Nast drew Santa Claus for Harper's Weekly in 1862, Santa was a small elflike figure who supported the Union. Nast continued to draw Santa for 30 years, changing the color of his coat from tan to the red he’s known for today.
  • Christmas 2018 countdown has already begun. Will you be ready???
  • Why do we love Christmas? It's all about the traditions. In this chaotic world we can miss the "good old days." Christmas reminds us of that time.
Edmirt

Best C7 led bulbs for blowmolds.

Recommended Posts

Any recommendations on the best brand of led bulbs for blowmolds and where to order from.  I have several soldiers and reindeer i want to put them in this year.

Share this post


Link to post
Share on other sites

I would like to know also. I bought some from a local store and wasn’t real impressed. Seemed like the light came from the top of the bulb if that makes sense.

Share this post


Link to post
Share on other sites

I tried some C7 LEDs I got from Menards the other day. The one on the right has the LED and the one on the left is a standard bulb. I think it looks pretty good compared to some others I have tried.

4CC45653-EDA2-4EDD-BBD9-3BAF08D74B7D.jpeg

Edited by shane page

Share this post


Link to post
Share on other sites

30 lumens is not very much light.    These bulbs are very efficient at 0.6W.  You don't need much light from a night light so they are good for that purpose.

Those are chip-on-board lights.  It's the first time I have seen them outside of the COB bulbs that come from China.   The clear globe incandescent lights that originally came with some of my blow molds are rated 250 lumens.   That's a good target for the amount of light you want for a larger blow mold but a bit more is even better.  That's why I have been suggesting possibly using 80 SMD 3014 LED corn bulbs even though they are only available in warm white. 

I'm surprised to see that Menards sells  all of the bulb designs I use for my LED conversions  but they don't sell them in the correct watt/lumen ratings.  The SKU for the night lights is Menards® SKU: 3538837

You can see the designs at Menard's specialty lamp listings

corn bulb Sku # 3538820    round plate bulb Sku # 3539600   chip-on-board LED light SKU: 3538823

 

Edited by Rich in Las Vegas
added SKU for Menards

Share this post


Link to post
Share on other sites

And a color change c7 of at least 300 lm

 

The ones I have now are a cool white and they are pretty bright. I wouldn't be surprised if they got the 500 lm Mark, or close. I'm going to order some more and test some differences, since I can't be sure which ones I ordered last time.

 

Sent from my Moto Z (2) using Tapatalk

 

 

 

 

Some manufacture needs to design a 500 lumen, cool white standard C7..
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F173685959174


Sent from my Moto Z (2) using Tapatalk

Share this post


Link to post
Share on other sites

Your wish is the Chinese suppliers command but not in a corn bulb style.  Here is a chip-on-board 110V, 500 lumen, white, E12 LED bulb.  The killer is if you only want one for $1.56, the $2 shipping charge gets in the way but the shipping charge is the same if you order 10 at $14.77.  That's about the same as you would pay a domestic seller for the corn bulbs.  Delivery time is fairly quick compared to the ones with free shipping.

https://www.ebay.com/itm/Dimmable-COB-LED-GY6-35-G4-G8-G9-E10-E11-E12-E14-E17-BA15d-Lamp-bulb-Warm-White/172943361657?hash=item28443a4679:m:mUpk51-tpcrk6MJWLyjBdMg

E12-500-lumen-COB-bulb-172943361657.jpg

  • Like 1

Share this post


Link to post
Share on other sites

If you are asking about the E12 500 lumen COB bulb from China, they are completely sealed in a silicone envelope.  You can't get much more waterproof than that.   I just received a shipment of ten 12V, 3W, 220 lumen, G4, cool white corn bulbs today for use in driveway markers.  They cost a bit over 50 cents each now that eBay is adding tax.  Shipping time was 18 days.   It's getting close to be sure you get stuff from China far enough in advance for Christmas.  I made 6 orders toward the end of October and only one has taken longer than 19 days. 

Share this post


Link to post
Share on other sites

Now if you can just find one that changes colors! I even found a adapter to screw into E12 and allow you to plug a G4 or 5.3 into it.

Sent from my Moto Z (2) using Tapatalk

Share this post


Link to post
Share on other sites

I did find one G4 RGB color changing disc similar to the regular LED lamp shown below.  It uses 12V DC.  I can't find it again but that isn't much of a problem because it is in Great Britain and they want $20 for one lamp and $22 to ship it.  Nobody in their right mind is going to spend that much on one lamp.

G4-circular-lamp.jpg

Share this post


Link to post
Share on other sites
I did find one G4 RGB color changing disc similar to the regular LED lamp shown below.  It uses 12V DC.  I can't find it again but that isn't much of a problem because it is in Great Britain and they want $20 for one lamp and $22 to ship it.  Nobody in their right mind is going to spend that much on one lamp.
G4-circular-lamp.jpg
Nope, not gonna pay $45 for one shipped!! I know they are out there though, have to run a 12v converter too though

Sent from my Moto Z (2) using Tapatalk

Share this post


Link to post
Share on other sites
On 11/19/2019 at 9:54 PM, Rich in Las Vegas said:

Your wish is the Chinese suppliers command but not in a corn bulb style.  Here is a chip-on-board 110V, 500 lumen, white, E12 LED bulb.  The killer is if you only want one for $1.56, the $2 shipping charge gets in the way but the shipping charge is the same if you order 10 at $14.77.  That's about the same as you would pay a domestic seller for the corn bulbs.  Delivery time is fairly quick compared to the ones with free shipping.

https://www.ebay.com/itm/Dimmable-COB-LED-GY6-35-G4-G8-G9-E10-E11-E12-E14-E17-BA15d-Lamp-bulb-Warm-White/172943361657?hash=item28443a4679:m:mUpk51-tpcrk6MJWLyjBdMg

E12-500-lumen-COB-bulb-172943361657.jpg

What are the advantages/disadvantages of the chip-on-board vs. the "corn" bulb?

TED

Share this post


Link to post
Share on other sites

I ordered the e12.. will see soon, how good they are.  Time will tell, cant wait to get these deployed into the display, and replace the power robbing C7 5,7 and 15 watt incans. Will advise ,once they are installed. Have appx, 60 or so to do!

Share this post


Link to post
Share on other sites

The design for the chip-on board (COB) is a recent Chinese innovation.  It uses multiple small LEDs mounted on their own heat sink, an aluminum plate backing.  There are two advantages.  That is size and heat dissipation.  Heat is the enemy of LEDs.  Overheat them and they die or have a very short life.  The built in heat sink allows the manufacturer to run them brighter than individual LEDs mounted on a circuit board as the corn bulbs do.  If you have replaced incandescent can lights in your home recently you probably have COB LEDs in them.   I have a 15W can light in the ceiling over my sink.  The COB is about 3/4" in diameter.  You could never get 15W out of that small a space using regular LEDs.   You can't pack them that tightly and the heat would mean a short lifetime, not the 10,000 or more advertised for most LED devices.

Share this post


Link to post
Share on other sites

I bought some of these 2.5W cob bulbs in cool white for use in penguin and santa blowmolds.  They look really good with a cool white glow instead of the yellowish soft white.  These bulbs have heat slots.  So don't use in a blowmold where water can get to the bulb. 

https://www.ebay.com/itm/E27-E14-E17-Corn-Light-Lamp-30-165Leds-5736-SMD-Bulb-Candle-110V-220V-Cool-Warm/222800979483?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

 

 

Share this post


Link to post
Share on other sites
On 12/7/2019 at 3:09 AM, panther93 said:

I have two vintage Empire Noel Candle blowmolds and I use the 40 watt LED bulbs.

49 watt seems like a lot compared to what some of the other molders are using.  How does it look?  Do you have a picture?

TED

Somebody posted a video recently of using flickering bulbs in candle flames.  I was  looking on eBay to see what I could find.  They are a little pricey but you can get the cost down to just under 3 bucks if you buy a 6 pack.  I didn't do an exhausting search like I tend to do when I'm going to order so you may find a  better price with a little searching.  There's probably a better deal if you buy from one of the direct from China sellers.

Here's a link to an example:
https://www.ebay.com/itm/352817176568

TED

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...