Jump to content
Did you know?
  • The original Rudolph did not have a red nose. In that day and age, red noses were seen as an indicator of chronic alcoholism and Montgomery Ward didn’t want him to look like a drunkard. To complete the original picture, he was almost named Reginald or Rollo.
  • The Christmas wreath was originally hung as a symbol of Jesus. The holly represents his crown of thorns and the red berries the blood he shed.
  • The three traditional colors of most Christmas decorations are red, green and gold. Red symbolizes the blood of Christ, green symbolized life and rebirth, and gold represents light, royalty and wealth.
  • Tinsel was invented in 1610 in Germany and was once made of real silver.
  • The oldest artificial Christmas trees date back to the late 1800s and were made of green raffia (think grass hula skirts) or dyed goose feathers. Next the Addis Brush Company used their machinery that wove toilet brushes to create pine-like branches for artificial Christmas trees that were less flammable and could hold heavier decorations.
  • ‘Jingle Bells’ – the popular Christmas song was composed by James Pierpont in Massachusetts, America. It was, however, written for thanksgiving and not Christmas.
  • Coca-Cola was the first company that used Santa Claus during the winter season for promotion.
  • Hallmark introduced their first Christmas cards in 1915.
  • The first recorded date of Christmas being celebrated on December 25th was in 336, during the time of the Roman Emperor Constantine. A few years later, Pope Julius I officially declared that the birth of Jesus would be celebrated on that day.
  • Santa Claus's sleigh is led by eight reindeer: Dasher, Dancer, Prancer, Vixen, Comet, Cupid, Dunder (variously spelled Donder and Donner), and Blixem (variously spelled Blixen and Blitzen), with Rudolph being a 20th-century inclusion.
  • Outdoor Christmas lights on homes evolved from decorating the traditional Christmas tree and house with candles during the Christmas season. Lighting the tree with small candles dates back to the 17th century and originated in Germany before spreading to Eastern Europe.
  • That big, jolly man in the red suit with a white beard didn’t always look that way. Prior to 1931, Santa was depicted as everything from a tall gaunt man to a spooky-looking elf. He has donned a bishop's robe and a Norse huntsman's animal skin. When Civil War cartoonist Thomas Nast drew Santa Claus for Harper's Weekly in 1862, Santa was a small elflike figure who supported the Union. Nast continued to draw Santa for 30 years, changing the color of his coat from tan to the red he’s known for today.
  • Christmas 2018 countdown has already begun. Will you be ready???
  • Why do we love Christmas? It's all about the traditions. In this chaotic world we can miss the "good old days." Christmas reminds us of that time.

Lee_N_the_NorthWest

Members
  • Content Count

    314
  • Joined

  • Last visited

Community Reputation

10 Good

3 Followers

About Lee_N_the_NorthWest

  • Rank
    New Member
  • Birthday 05/10/1960

Contact Methods

  • Website URL
    http://www.lundaylights.com

Profile Information

  • My favorite Christmas story
    My first year doing synchronized lighting. I had two little girls make me a home made Christmas card saying how beautiful the lights are.
  • Location
    Arlington, Washington
  • Biography
    2010 first year to do synchronized lighting.
  • Interests
    Computers,cars, and lighting
  • Occupation
    Computer guy
  • About my display
    Don't have one yet, But soon I will see the light.

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Used LOR this last year, but I purchased Light Show Pro and I am learning that right now. It is incredibly more versatile but with that comes a bigger learning curve. That is why I bought it early. Now if you want to stay with LOR and manage some RGB I would suggest Xlights and Nutcracker. Sean has some really cool effects that you can program in Xlights/Nutcracker then export out in LOR compatible sequences. The best part is Xlights/Nutcracker is FREE. and Sean does great tutorials on using it .
  2. What are you replacing? Most the time I add on, I used my old dumb strips to put around my windows and doors then build a new mega tree using 12 smart strips.
  3. The DMX most of us are using is E1.31 (DMX over Ethernet). So if you decide to go that route then you would look at a controller like the J1sys P12x or the San Device E68x. Both are great controllers. I use the P12S model personally. I drive my show with LOR but programming smart pixels a that are not LOR in LOR is very time consuming. So I use Xlights/Nutcracker to make my pixel sequences then copy into LOR. If you decide to go into the smart pixel lighting there are plenty of us to help you. Lere
  4. Ditto on Dave's comment, You do not have to invest in the wire and outlets yet but at least put the conduit in the ground and cap it off if you decide to not use it right away. A drawing of the yard layout would help us, help you!
  5. Those are compatible with that LOR controller. They are the 60 LEDs per meter which are very bright. I use the 30 LEDs per meter and they work great. Are you going to be using these in a full strip or cutting them into small strips to go around window frames and things? If so you may need to get extra end caps for the tubing. Now for the Flood, If you do not want to build one then you will most likely need to buy the LOR flood or buy a LOR to DMX controller. There are many DIY kits available I know David has some at Holiday Coro. I built my own floods using a $10.00 spot from Home Depot and some of these LED modules from Ray Wu. very simple with a hot glue gun, solder iron, and some wiring they would work with the CMB24D controller also.
  6. Dave, I used the ws2811/2812 strips and had no issues other then power. (My own fault). I do know that a friend of mine had a lot of problems with the 12vdc Technicolor square pixels. I believe it was an issue with the 12vdc to 5vdc converter each node has. He has spoken to the vender and is getting them replaced. There is rumor that a bad batch in one of the components that made up the pixel was to blame. He might chime in on here if he sees the post and shed some light on the issue. I will talk with him in the next week or so but he is very busy with his tear down right now.
  7. Louie, Yes I am working on the LSP sequences already for 2014 Christmas. I think what happened the first time is I imported the LOR sequences and then added my pixel tree and the way LSP does the whole channel count I screwed it up and could not get anything to work correctly. It is going much smoother starting from scratch. Cheers, Lee
  8. Louie, Have you played with Xlights/Nutcracker effects? I plan on switching to LSP this year, I wanted to last year but I was having a poor learning curve and with adding the 1800+ pixels and the fact that the LOR sequences where not importing very well into LSP I used Xlights and LOR with a lot of copy/paste going on. I like the way LSP can make an effect on the whole display rather then a single element if you want.
  9. Louie, Your tree is awesome! I think the issue with your network is rebroadcast. If you where sending broadcast data and not unicast then each hub was sending the same data out again and again and flooding the network. I see you got it fixed I was just letting you know what the issue was. Are you using LSP for your programming?
  10. Louie, You are correct a pixel is most commonly used in reference to a smart string or strip. I was simply using the term he did for dumb pixel in the response above mine. My bad!
  11. Wilder Yes, if you get the $110.00 board from LOR you can control 8 RGB channels with LOR software. Superstar is used to make programming easier. It is not required. If you where getting smart pixels and had hundreds if not thousands of pixels then you would want something like Superstar to help program. Your version of LOR just needs to be able to do RGB channels.
  12. You must have bought the 12 vdc ws2811 strips. if you get the 5 vdc strips then they are one LED module to a pixel. I use ws2811 5 vdc with the chip built in to the light. I believe they are now called ws2812.
  13. Thanks Louie, What controller are you using? I use the J1sys P12S, it will handle 12 strings no problem. The cost is around $225 if I remember correctly. That would help keep the cost per tree down if the requirement for more then 6 is there. Cheers, Lee
  14. He will combine orders. You need to get a list of everything you want and send him an email. He should get back to you with in a day or two. The 5 vdc strips/strings are usually smart single controlled pixels. The 12 vdc are either dumb like the link I posted or smart with 3 leds to a pixel. I don't know if that is a hard fast rule but it is what I have observed. The waterproof rating is IP68 is the highest then IP67, IP65, down to IP33 no waterproofing. Make sure you ask the IP rating for each item you buy. The web page can say IP68 in the title then down in the description it may say IP67, so always ask.
×
×
  • Create New...