Everything posted by spdif48
You are very welcome. Hope you have fun making one. I ended up finding a leftover ikea socket and cord set from a chinese lantern I had. I got a 4 watt LED bulb at the local hardware store and it worked great.. Mine lasted outside for 4 weeks and 2 rain showers which I think is pretty good for paper. Looks like I should make the tabs a quarter inch longer. Next time I get a working copy of autocad I'll update the PDFs. Here's a pic of the star in the display
Instructions: 0. Gather paper, scissors, glue, and binder clips. A straight edge will make folding easier. 1. Print 18 square patterns and 8 triangles. (I left out one square pattern to make room for a light) 2. Cut out all the patterns on their outside edges 3. Fold up on all the inside lines, including the tabs 4. Glue all the long tabs to the matching inside face 5. Start with a square pyramid and glue a square to each of its short tabs with all the pointy ends pointing in the same direction, To keep everything lined up match up the two tabs as closely as possible then match
It's about 75% text weight vellum and 25% elmers glue. Maybe closer to 60-40 although it's hard to tell how much glue is in the star and how much was on my fingers. The vellum is a really nice cross between transparent and durable. Since I;m in San Diego it should be okay outside under the eves for our balmy christmas season. If anyone wants to try one I can post the instructions.
That is a great idea. I knew the PC members could save my project. I'll try a piece of balsa wood instead of cardboard to support the clip.
I always wanted a Moravian star for my display but I didn't like what II saw for sale so I made my own. My original plan for lighting it from the inside was to leave one spoke out, cut a piece of cardboard to the size of the base of a spoke, run some SPT1 through a hole in the cardboard, put a C9 socket on one end of the SPT1 and a plug on the other then glue the cardboard to the star. Then I realized that Murphy's Law means as soon as I glued the cardboard in the lamp would fail. Does anyone have an idea how I could rig a removable lamp in my star? Yes, RGB pixels would be awesome. No,
I was looking at the garland hangers Costco is selling this year and needed more info so I checked out the web site in the manual, vlcpro.com They sell LED retrofit C9's with some features that got me interested so I bought a set to try them out. The first trick is supposed to be a "spotlight tip", similar to what BigChair85 was looking for I've seen c7/c9's cast a bright spot of light and I think it makes an interesting look. It's nice how what the light shines on is brighter than the bulb. Unfortunately these bulbs don't deliver. The next trick is they stack the LEDs in the mid
I can't find the manual on that coin mech. http://na.suzohapp.com/images/pdf/ins_40-1500-05.pdf looks similar. I've been reading too many coin mech manuals. The one in the manual has an open collector output. So when it detects a coin it should ground the coin signal pin which is exactly what the commercial LOR controller inputs want. I think I'm going to rig a motion detector to an arduino (for time delay) to a Furman PS15 to run my snow machine this year, Not the most practical or cheap setup but it sounds like fun.
I've been really happy with the snow machine that came with the Snow Masters (now Global Special Effects) 1st generation Amazing Snowman. The one their selling now looks like they just moved some controls and ports around in the case. I've had it for three years now and haven't had any problems. It looks great at home and really blew everyone one away when I put it on the roof of the four story office building where I work. I'm not saying it created a blizzard but it was enough to make a 75 degree Christmas Eve in San Diego special. I can't remember how much power it pulls, somewhere b