Jump to content

Gary Sutherland

  • Content Count

  • Joined

  • Last visited

Community Reputation

0 Neutral

1 Follower

About Gary Sutherland

  • Rank

Profile Information

  • Location
    , ,
  • Occupation

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Here's a commercial tool: http://stakepuller.com/ Looks simple enought that you could just make one if you're handy with metal.
  2. Scott, I haven't been here for awhile, but I remember you working on your ice skating rink. Couldn't find any recent posts, so thought I'd ask..... Did you find a satisfactory solution to the animation problem; moving the skaters in different, overlapping paths? Or did you settle on a simpler movement? If so, how is construction going, and do you have any pics of what you're doing? About what scale are you building? I still like the idea for the future. Thanks, Gary
  3. Oh, I forgot to ask.... What do you use for the socks? If you make them, what fabric do you use? Thanks... Gary
  4. Mike... I've thought about trying to build a fairly large snow machine. So far, it's just wishfull thinking! I've been looking at this: http://www.harborfreight.com/1-hp-mini-dust-collector-94029.html Lot's of CFM, but does it have enough pressure? Your project sounds like a lot of fun to build. How's it coming along? Gary
  5. Years ago I made up some multicircuit strings, and I used Jones connectors. They're simple and available in various pin counts. They are rated for 250 volts and I think usually around 10 amps per circuit. They won't be quite as cheap as equivalent vampire plugs, but they're pretty inexpensive. As I recall, I bought them from Mouser. Gary
  6. I remember at least a couple of people here discussing their plans to build an animated skating pond. Has anyone succesfully completed one? What method of moving the skaters did you end up using? Thought this might be fun to build, and I can think of a few ways to animate it, but I can also imagine a lot of possible difficulties with those methods. Any advice would be appreciated and might prevent my 'little skaters' from flying off into the night sky. Gary
  7. If your anchor points are permanent for future years, sounds like concrete is a good way to go. If you want something quick, you might try some Duckbill anchors. I've used these on quite a few projects (not on a mega tree yet). They're available in different sizes and amazingly strong and easy to install. Here's a description: http://www.earthanchor.com/duckprod.html
  8. Anyone know or have a good guess as to how the trees in this video are made? I guess they're not really 'mega trees'; don't know what to call them, but I've seen this video a few times and really like them. Gary
  9. I haven't seen your winch, but the clamps have threaded studs. Put two of them on the back of a square plate and mount the winch on the plate. Or if your winch will allow it, put the two clamps directly on the winch bracket. Once this is assembled, mounting or remvoving it from the pole would take just seconds. Welding would definately be cheaper, but the clamps would allow you to easily remove the winch when storing the pole. Here's a picture of one with a wing nut on the stud:
  10. Welding studs, U-bolts or a plate to the pole would certainly do it. Has anyone here ever drilled through the pipe and had it fail later do to being weakened? If you do want to go with a clamp system, a pair of scaffold clamps would hold more weight than you would ever want to put on the pole with no risk of slipping. http://www.thescaffoldwarehouse.com/3-Stud-Clamp-PSV-773T.htm?categoryId=-1 gary
  11. How about Mrs Claus in an apron or a nice elf lady baking in an old time oven. The oven door could open to show a giant cookie, smiling gingerbread man or something, baking in a warm glow and then close again (motor fun!). Some 'porchlights' that look like big candies and light up might be fun. A candy chimney on the roof over the stove with an amber light in it and a little smoke coming out. Two little elf children standing in snow outside the doorway peeking in? I'm sure you'll have many ideas for this. Displays that have the 'warm fuzzies' are always fun to do, I think. Be sure to pos
  12. A guy I used to know made some automatic X-faders like that by adding a simple control circuit to a couple of cheap household lamp dimmers. Unfortunately, my electronics ability is pretty much limited to soldering, but maybe someone here will know how to do it. As a slightly more expensive alternative here are two. The first is available at http://www.digitalsl.com/products/lighting/selc/lc/lightingcontrolers.html It's $30, and 300 watts per channel, so I don't know if that's enough for what you're planning. The second is available at http://www.christmasdonebright.com/s.nl/it.A/
  13. This $5.99 aviation cable cutter from Harbor Freight will cut 1/8" like butter. http://www.harborfreight.com/cpi/photos/94400-94499/94449.gif Like everyone says, tape the cable first. Gary
  14. I buy 1 1/2" black pipe at one of the local steel yards. $1.80 - $2.00 per foot, depending on quantity. They can cut it, but this yard can't thread it. Fortunately, I have access to a pipe threader. Remember that the black pipe is more prone to rust than galvanized, but that hasn't been a problem. Gary
  15. Kmwiegand: Here: http://www.christmaslightsetc.com/p/9-ft-Christmas-Garland-Lights-300-Amber-Lamps-Black-Wire--17907.htm These are listed as 'amber', but look orange. In the past, any amber lights I've ordered, as opposed to 'gold', or 'yellow', have been very orange. In this case, I'm not using these for Halloween, but for an event at a school who's colors are orange and black. Gary
  • Create New...