Jump to content

Buckeyelights

Members
  • Content Count

    1,228
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by Buckeyelights

  1. I made the kissing Claus's, used the thin board, and while it is holding up, mine developed a curve in them. They still move well. I intend to reinforce the backside with a narrow angle to take at least some of the curve out. Good luck!!
  2. Another option is to email or take an image to a local blueprint shop; a place that prints plans for architects, engineers, etc. They can enlarge any imagine (without a copyright) to any size you want. The local one I use can print 46" wide (paper is 48" wide) x whatever length I want. If the image is wider than 46", they print it on multiple pieces. Cost is $6 - $10 for a 46"x 72" tall print. Easy, fast and you have a pattern that's reusable.
  3. Very well done!!! Thanks for putting this together.
  4. I was planning on joining in but missed it too. Will there be a video of it available to watch? Tks!!
  5. That's very kind and thoughtful of you to honor her and her late husband.
  6. In my opinion motion lights and signs are the cheapest, easiest, and yet most effective deterrent. A security camera that's clearly visible can be very imposing to a kid messing around. However a sucker or candy cane line the sidewalk out from is quite vulnerable. fortunately items like that are inexpensive and hopefully replaceable. As I mentioned above, I attach a cable to most items in the yard. You could attach a cable to the suckers, and while someone could still knock it over, break it; they're unlikely to run off with all of them if you attach the same long cable to each sucker. With w
  7. www.halloweenforum.com It is an outstanding forum. I'm always amazed at the amount of traffic on it. You'll find many professional haunters as well as small residential decorators.
  8. Thought I'd share an idea that has helped prevent vandalism to our display. We do have security lights on motion detectors and all of the display items in the yard are secured with a vinyl coated security cable. But another thing I do is visit our local police precinct. They have a "watch" program, where they'll provide the officers on duty with a list of addresses to keep "watch" over. It can be used when someone is away for extended periods of time, etc.; or to keep "watch" over a display. When the officers are not on a specific run, they'll cruise by the addresses on the "watch" list.
  9. Instead of the pvc base, simply use a piece of rebar to slide inside the pole. You'll need to guy wire it against the wind. I use 50# test fishing line for guy wires on 10' tall poles. You don't see the fishing line which is nice; however be careful, you don't see it either and it's easy to trip over.......he says from experience
  10. 20' is a long arch so it would likely need support mid-span. Mine are 10' long and I use a guy wire (fishing line actually) to keep the top of the arches in line with each other. Over 20', try a guy wire at 1/3 points, run it in opposite directions, perpendicular to the arches. So you'd have 4 guy wires on each arch. The 2' rebar should be enough to keep the ends of the arches in place.
  11. I have a PVC mega tree, but it's 18' high; so I have no experience with a 30 footer. This is just my opinion on your question. I think you could use pvc. I would strength the joints between sections of pipe and not depend solely on the threads. I'd slide a long section of 2" pipe inside the 3" pipe at the joint, like a 6-8' section, so it would have 3'-4' of pipe on each side of the joint. I'd also put support wires every 10', so at 30' it would have 9 support wires. Once vertical, it'll be fine. Just have to be careful raising it, so the pole doesn't buckle. Maybe build a li
  12. Those are outstanding. The detailed painting of Sally's dress is excellent!
  13. Hello fellow Buckeye, I've been making and displaying plywood cut-outs for more years than I care to admit. I typically use 1/2" exterior grade plywood, one side sanded smooth; available at any home improvement store or a lumber yard. For a 6' high piece, I'd use 5/8" (little hard to find) or 3/4" thick; the 3/4" material is heavy, so call around and try to find the 5/8" material. I agree with NH-Dave, use a good primer on all sides, including the edges, after you cut out the shape. I use two coats of primer. I prefer exterior paints and use two coats of exterior paint. I'm not a f
  14. Agree! Even snow is OK, but cold rain is the worst.
  15. This works very well: http://www.thewinfieldcollection.com/category/s?keyword=transfer+paper Most art supply, hobby shop will have it too.
  16. Seems like it would should be easy to use a motor and assembly from a wire frame reindeer, who's head moves up and down or back and forth. That same basic motion could turn Santa side to side.
  17. Hi Tin barn, Not Bill, but I just checked the LUO website and I can post just fine. Are you sure you were logged in? If so, then there's something going on at the "Tin Barn". good luck! Joe
  18. I like this one: http://www.danburymint.com/Sports/prod/864/Ohio-State-Buckeyes-Santa-Figurine_3325-0044.aspx
  19. Some of the blow mold experts may correct me, but that deer you got is quite desired and often rather expensive.
  20. Looks great!!! I too like the gargoyle on the roof.
×
×
  • Create New...